Amd rx 480 ethereum hashrate

The only page you need to keep an eye on. It's the main page that shows you all there is to know: your daily and monthly income by currency, and their USD and BTC equivalent. You can re-start the benchmarking process and access your online wallet. The list of all installed miners and all the mining algorithms.

Here you can see the hashing speed for each algorithm as well as the daily and monthly income estimation. The upper panel will display a red message in case one of the monitored miners fails. As we mentioned the results shown on the screenshot are from an 8 GB model of RX that apparently has the video memory running at 8 GHz the same as on RX 8GB models , so the same performance is to be expected.

The expected hashrate in mining Ethereum is more like around 20 MHS for the 6. Another thing to note is the price difference between the RX and RX for the 8GB models with 8 GHz video memory, if it is not big enough the could remain the better choice.

Using a lower operating frequency and voltage for the GPU with the power limiter set at the right value should lower the power consumption, but not change the performance you get while mining Ethereum. Further lowering it below that optimum spot and you will start seeing a drop in mining performance, so our goal here was to find the sweet spot where the hashrate will not be affected.

The result was Watt drawn at the wall, taking in consideration the PSU power efficiency that should be about W actual power usage. This is down from W at the wall with default settings with pretty much the hashrate unaffected and the temperature also went down from 68 to about 60 degrees Celsius. The performance we got with this setting was about You can experiment by further reducing the power target slider under these recommended values, however with the additional power savings you should also start noticing reduction of the hashrate you are getting.

Still if you are looking for optimal efficiency you might try going lower and if you already have Radeon RX and use it for Ethereum mining you are welcome to share your settings in the comments below. The new AMD Radeon RX is now officially out and we have some results from tests we have actually performed ourselves, results that pretty much confirm an earlier leak that was posted about the expected hashrate.

Anyway, we are sure that most of you are interested in the Ethereum hashrate that the RX is able to deliver and we have information about that. The hashrate for Ethereum mining that thr Radeon RX delivers is good, though the power level is not that great, the cooling of the reference design RX is also not that great for mining and the price is also not what some people in some regions expected and on top on shortages, though in many places you can buy the card at the price that AMD announced or close to it and there are enough cards.

At launch it is hard to find 4GB versions as apparently they are much fewer as compared to the 8GB models, but if you are buying a card for mining the 8GB model is the one you would want. The result we are getting is about So taking into account the power conversion efficiency of an 80 Plus Gold PSU that was used the actual power usage of the card is apparently W at the default settings.

This is further confirmed by the fact that while mining Ethereum with the default settings the GPU frequency hovers up to about MHz and does not go all the way up to MHz. With dual mining mode enabled to mine both Ethereum and Decred at the same time the results show about So essentially the RX does pretty well in dual mining mode with not so much of a drop in the Ethereum hashrate while providing some good extra performance for mining Decred. Moving to overclocking, the only thing we need to do is increase the video memory to the maximum and in this case this means 9 GHz the card might be able to handle more, but the overclocking software or the driver is apparently capped at 9 GHz max.

Can 0.042 bitcoin share your

Think, btc vehicle rentals talk, what